ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 )

ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 )

Marsoni

M251S

$42.96

Get it in 3 business days with 1 day shipping. Friday, May 29

ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 )Lieferumfang: Profildoppelzylinder C 73 N 35 50 mm Produktbeschreibung: Not und Gefahrenfunktion beideitig gefertigt nach DIN EN 1303 Klasse 3 und DIN 18252 Klasse P 2 Messing matt vernickelt Pilzkopf Gegenstifte fr einen wirksamen Picking und Manipulations Widerstand lange Lebensdauer durch hochwertige Materialien Stiftlochbohrungen von unten sichtbar verschlossen mit je 3 Schlsseln und Stulpschraube 5 x 80 mm im Einzelkarton Technische Daten:

Easy Shipping

Quick Dispatch:

Your ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 ) orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 ) ships.

Need Help?
Questions about ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 ), sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for ABUS Profildoppelzylinder C 73 N 35/50 mm ( 3000280114 ) in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 5, 2023

Verified Purchase

Greg

Dallas, US

★★★★★ 5

Great value

This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 16, 2024

Verified Purchase

Tommy Knapp

Waukegan, US

★★★★★ 1

Unfinished product - doesn't work - waste of money

in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on May 26, 2026

Verified Purchase

Beach guy

Bozeman, US

★★★★★ 5

Good tool, but must be hand drilled to accept bearing installation cup

Good tool, but you have to drill a hole in the bearing installation rod to accept the cross bolt that locks the bearing installation cup onto the rod.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on January 23, 2023