FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089

FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089

Marsoni

M251S

$303.45

Get it in 3 business days with 1 day shipping. Friday, May 29

FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089Fresh new look for the steel tank cars! Key features include: High current 6 Pin electrical bulkhead Enough pins to power conventional pumps or a brushless pump and connect the fuel level sender Convoluted fuel tubing for long lasting performance and reliability in all fuel types 90deg AN6 fittings Billet clamp options of 39mm or 46mm (Bosch Motorsport BR540) diameter to suit most aftermarket pumps New modern OEM style fuel float, remote mounted for

Easy Shipping

Quick Dispatch:

Your FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089 orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089 ships.

Need Help?
Questions about FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for FPG S13 180SX R32GTST Single Pump Hanger Kit Billet Hat -6 V3 FPG-089 in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 26, 2025

Verified Purchase

Harvey

Birmingham, US

★★★★★ 5

Good stuff, but watch the temp

Model: NewSLS50_52

I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on November 16, 2023